{"product_id":"anvil-1-2-in-fpt-x-1-2-in-d-fpt-3-8-in-d-fpt-galvanized-malleable-iron-reducing-tee","title":"Anvil 1\/2 in. FPT X 1\/2 in. D FPT 3\/8 in. D FPT Galvanized Malleable Iron Reducing Tee","description":"\u003cdiv\u003e\n\u003cp\u003eWhen a reliable, long-lasting branch is needed in a galvanized water, heating, or light-duty piping system, the Anvil 1\/2 in. FPT x 1\/2 in. FPT x 3\/8 in. FPT Galvanized Malleable Iron Reducing Tee delivers clean, dependable results. Crafted from durable malleable iron and finished in galvanization, this reducing tee provides three threaded connections that accommodate two 1\/2 in female pipe thread (FPT) ports and one 3\/8 in FPT port. It’s the smart choice for creating a controlled branch off a main line without compromising flow or seal integrity.\u003c\/p\u003e \u003ch3\u003eKey features that matter in the field\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eMaterial and finish:\u003c\/strong\u003e Malleable iron with a galvanised finish combines strength with corrosion resistance, making it well-suited for exposed or humid environments and extending the life of your piping runs.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eThread configuration:\u003c\/strong\u003e Three female pipe thread connections (two 1\/2 in FPT ports and one 3\/8 in FPT port) for straightforward assembly with standard male fittings.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eReducing tee design:\u003c\/strong\u003e Precisely reduces from 1\/2 in to 3\/8 in on the branch without sacrificing flow or ease of installation, ideal for feeding smaller-diameter appliances or fixtures from a common supply line.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eFinish and compatibility:\u003c\/strong\u003e Galvanized surface enhances rust resistance in indoor and outdoor applications, compatible with standard piping systems that use male adapters or threaded couplings.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003ePractical applications\u003c\/h3\u003e\n\u003cp\u003eUse this Anvil reducing tee to branch a main 1\/2 in line to a smaller 3\/8 in line—perfect for sprinkler or irrigation accessories, small-diameter sensors or valves, and auxiliary fixtures in residential or light commercial installations. It’s equally at home in a furnace room, utility closet, or outdoor hose bib setup where durable, water-resistant hardware is essential.\u003c\/p\u003e \u003ch3\u003eWhy this Alives the value\u003c\/h3\u003e\n\u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eReliability by design:\u003c\/strong\u003e Malleable iron provides strong creep resistance and enduring fitment under typical plumbing pressures, while galvanizing shields against rust in challenging environments.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eExact sizing for straightforward installs:\u003c\/strong\u003e Standardized 1\/2 in and 3\/8 in FPT threads align with common supply lines and components, reducing guesswork and rework on site.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eLongevity with practical maintenance:\u003c\/strong\u003e Smooth internal passages and robust threads minimize leakage risk; pair with appropriate thread sealant or PTFE tape for a dependable seal that stands up to routine temperature changes and vibration.\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch3\u003eInstallation and care tips\u003c\/h3\u003e\n\u003cp\u003eBefore assembly, clean the male threads and inspect for any damage or burrs. Apply an appropriate thread sealant or PTFE tape, then tighten to the recommended hand-tight plus a final quarter-turn (follow local code guidelines and manufacturer recommendations). Avoid overtightening, which can damage threads or compromise the seal. When disassembly is required, Kapton or silicone-based sealants are not recommended on dissimilar metals—stick with standard plumber’s tape and compatible fittings to preserve the galvanized finish.\u003c\/p\u003e \u003cp\u003eDesigned for reliability and easy integration into existing lineups, the Anvil galvanized malleable iron reducing tee helps you build robust, leak-resistant piping networks with confidence. Use it wherever you need a precise 1\/2 in to 3\/8 in branch connection, and trust the enduring performance Anvil fittings are known for.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Anvil","offers":[{"title":"Default Title","offer_id":52176687104274,"sku":"4003679","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0928\/1024\/8466\/files\/4003679_A.eps_High.jpg?v=1775591203","url":"https:\/\/nationalhardwaregroup.com\/products\/anvil-1-2-in-fpt-x-1-2-in-d-fpt-3-8-in-d-fpt-galvanized-malleable-iron-reducing-tee","provider":"National Hardware Group","version":"1.0","type":"link"}