Skip to content
Shop Your Local Store ● Ship to Your Hometown Store
Pro & Contractor Accounts ● Apply for Net Terms
100,000+ Products ● Trusted Authentic Brands
FAQ Shipping & Returns Order Lookup Contact Account
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer
Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer

Milwaukee M18 FUEL 16 Ga. 18 Volt Brushless 20 deg Angled Finish Nailer

Cuts the compressor and hose from trim work with brushless cordless power and a 110-nail magazine for long runs.
Milwaukee MPN 2841-20
Sold Locally Only

This product isn’t sold on our website — see your local hardware store.

Typical Store Price i
Typical store price: low $321.99, average $379.00
In-Store Exclusive

This one's worth the trip to the store.

Brands like Weber, Milwaukee, Yeti, and DeWalt restrict where their products can be sold online — and for good reason. In-store buyers get authentic products, full manufacturer warranty, and access to pricing that simply isn't allowed to be advertised on the web.

  • Authorized dealer network · Full manufacturer warranty & support
  • Guaranteed authentic · No counterfeits, no gray-market resellers
  • The brands set these standards · Be wary of sellers who don't follow them
Why isn't this online? The whole story →

About Product Overview

Milwaukee built the M18 FUEL 2841-20 to cut the compressor and hose out of finish work without cutting performance. It's an angled 16-gauge finish nailer that runs on M18 battery power, so trim carpenters and remodelers can work off a ladder, in a tight closet, or on a job site with no air line in sight. The brushless motor is matched to Milwaukee's proprietary engine, giving it the drive needed to sink nails from 1-1/4" up to 2-1/2" into casing, base, and crown consistently.

A bottom-load magazine holds 110 paper-collated nails at a time, cutting down on reload stops during long baseboard or trim runs. At 6.5 lbs bare, it's light enough to run one-handed overhead or in awkward angles for extended stretches. This is the bare tool (2841-20) - battery and charger sold separately - and it's backed by Milwaukee's 5-year warranty.

  • Gauge: 16, Angled Finish Nailer at 20 degrees
  • Fastener range: 1-1/4" to 2-1/2"
  • Bottom-load magazine, 110-nail capacity
  • Paper strip collation
  • 18V brushless motor, bare tool (no battery/charger included)
  • 5-year manufacturer warranty

The Details Specifications

Brand Milwaukee
UPC 045242591947
Case Pack Quantity 2 per case
Retail Unit Quantity 1
Dimensions (L × W × H) 7 × 15 × 15
Weight 9 lbs
Country of Origin VIETNAM
Safety Data Sheet (SDS) Manufacturer documentation · opens in new tab
Shop Local · Support Independent

Every order helps keep your local hardware store on the corner.

Why we built NHG
You might find it for less locally. Independent retailers often offer competitive pricing — some products are even cheaper in-store than online.
Real expert advice — not search results. Independent hardware staff know their inventory and the local conditions you're working in.
Keep the neighborhood working. Every dollar spent at an independent retailer returns roughly 3x more to your local economy than at a national chain.

Ask our counter. Or theirs.

Most hardware stores can do more than you think. If we can't help you, the folks down the street probably can — just ask at the counter.

What we offer
Shop Your Local Store Ship to your hometown store
Pro & Gov Accounts Net terms · tax-exempt
Ships Nationwide Direct to your door
Independent Network Real hardware stores
$0.68 of every dollar spent at a local independent business stays in the community. At a national chain, it's about fifteen cents. Civic Economics, multi-city retail studies
100% Authorized & Genuine — Our Guarantee →
Their Counter
Try local first · we'll wait

The stores we send you to are local and independently run — often for generations, the kind of place where someone behind the counter knows the regulars. We don't own them. We just think they deserve the foot traffic. They can put most of what we sell on their next truck. Ask there before you check out here.

Find a local store →
Mon–Fri 6–5 PST
Independent hardware retailer? Join the network →
About our directory. National Hardware Group is an independent retailer and directory. The local stores we list and link to are separately owned and operated — we have no ownership stake in any of them, and most pay us nothing to be included. That includes plenty of stores flying a familiar banner that people don't realize are locally owned and run, not operated by a corporation. Store owners can choose to upgrade their listing for an enhanced presence or pickup features, but the base directory is free, and inclusion is never a paid endorsement.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare