Meet the Senco 3 in. L X 16 Ga. Angled Strip Galvanized Framing Nails, a purpose-built solution for demanding framing tasks. With a 20-degree plastic-stripped angle and a robust 2,500-count box, these nails keep your project moving from start to finish—whether you’re building exterior frames, decking, or tough rough carpentry.
-
Length and gauge: 3 inches long, 16-gauge for solid, dependable fastenings on common framing lumber.
-
Coating: Galvanized finish provides corrosion resistance for outdoor, damp, or kiln-dried environments.
-
Head and point: Full-round head for strong load distribution and a clean driving result; diamond point designed to start quickly and reduce wood splitting.
-
Shank and drive: Smooth shank minimizes wood cracking during insertion while delivering reliable pull-out resistance in typical framing applications.
-
Collation and angle: Angled strip nails at 20 degrees, plastic collated for smooth feeding and jam-free operation in compatible nailers.
-
Packaging and quantity: Boxed in a convenient 2,500-count bundle for longer jobs without frequent reloading.
-
Diameter: 0.131 inches, tuned for strong, secure fastening into framing lumber.
Why this nail set stands out
- Designed for outdoor framing and moisture-prone projects where corrosion resistance matters, thanks to the galvanized coating.
- The combination of 3" length, 16-gauge thickness, and a full-round head delivers dependable shear strength and holding power across joints and connections.
- Diamond-point tips reduce resistance during entry, speeding setup and minimizing wood splitting on dense or knots-prone boards.
- Smooth shank helps drive smoothly through lumber without excessive friction, supporting faster finish work and less fatigue on the jobsite.
- 20-degree plastic strip collation ensures reliable feeding in compatible framing nailers, keeping lines tight and jams rare on longer runs of framing.
Ideal uses and scenarios
- Framing exterior walls, roof purlins, and subfloor assemblies where a strong, long-lasting fastener is needed.
- Deck framing and outdoor structures where a galvanized coating helps resist rust and discoloration over time.
- Sheathing and rough carpentry tasks that demand precise starting and consistent drive depth.
- General purpose 16-gauge industrial framing projects that require a robust, dependable nail with steady supply (2,500 nails per box).
Compatibility and practical tips
- Use with framing nailers that accept 20-degree plastic-strip nails and are calibrated for 16-gauge, 3" fasteners.
- Before firing, ensure the nailer is set to appropriate depth to achieve a flush or slightly countersunk head without over-driving.
- Avoid driving nails into excessively knotty or extremely hard sections of lumber; predrilling can help in sensitive species.
- Store in a dry location to maintain the galvanized finish and prevent rust or corrosion over time.
For professional carpenters and serious DIY builders, the Senco 3 in. 16-Gauge Angled Strip Galvanized Framing Nails (20°) deliver reliable performance, fast setup, and durable results across a wide range of framing and exterior projects. This 2,500-count box ensures you’ve got enough fasteners to complete big jobs with fewer interruptions—and the galvanized finish keeps your project protected from the elements as it goes together.
